An accidental leak of one of the reasons may be due to clean your laptop keyboard. Normal use, will show reduced, and effective over time. If your laptop keyboard does not work as it used to, a thorough cleaning, you can make it like new.
Open the keyboard
Make a graph, where each key it should go back together easily. Use a small screwdriver, pop up a small container and place of each key. Delete key, do not force too much, they should pop right up. Put the key in the container, if there are additional key pieces of rubber, placed in a separate container.
Cleaning the keyboard
With a cotton swab dipped in water just a little bit, thoroughly clean the HP Pavilion dv7 Keyboard, including the place does not appear dirty. To a very small, narrow places, the use of forceps and a very small piece of foam rubber.
Follow the same steps, use rubbing alcohol, but do not use plastic foam, because it can fall apart when exposed to alcohol wipe.
Using naphtha (also known as lighter fluid) is applied foam to do the final cleaning of the keyboard.
Clean button
Clean each key individually using lighter fluid soaked cotton swab. Then placed in the filter all the keys in the sink strainer. Household spray cleaners, rinse with hot water, then lay on a towel and allow to dry completely.
Clean the rubber parts
Household cleaner in the sink and sprayed in a filter all the rubber parts. Let them sit for 5 minutes, then rinse with hot water. Place on a towel and let them dry completely.
Lubrication and keyboard keys
All the keys on the bottom of a paper bag. Them from a 45 degree angle, dry film lubricants, available at most auto dealer to buy coats. They will almost instantly dry.
Use paper and transparent tape, in addition to the HP Pavilion dv7t-2000 Keyboard on a laptop to protect everything. Dry film lubricant coating keyboard, let it dry.
Put it back together
Replacement of key pieces of rubber. Then, make sure each wire is a critical first line of the right of each key card into place.
Tags: HP Pavilion dv7 Keyboard
