Key stuck? Debris and dust on the laptop keyboard? Tired of shooting to its compressed air and all parts of the garbage? Follow these steps to clean the keyboard ever!
Delete key
1
Keyboard picture, so you will know, before the start of each key, delete it.
2
Made with a solid bottom metal nail files or other objects until the close of the keyboard “pops” thin tips of each key is a key part of the bottom. You will need to move the slide object, you remove the key from the keyboard, the delete key. You are trying to do is slide the key between itself and the bottom of small plastic pieces, place in a fixed nail file prompt. You can also use a pair of thin pliers, my Delete key on the keyboard. The first key, may be difficult, because you can not really see your work, but once you figure out how to connect to the keys on the Toshiba Laptop Keyboard, the rest of the keys will be very easy. Remember to be gentle, because you do not want to break anything.
3
Critical tilt upward and backward, until the top of the important part of the “pops” loose, the key should now be entirely from the keyboard. Slowly, gently, you do not undermine the fragile plastic parts.
4
Set a bowl of warm soapy water key. Mild detergent work just fine.
5
Blocked sink, and fill with warm water, enough to make the keyboard submerged. Add some dishwashing soap, if you have your receiver on the sprayer, spray before using the keyboard, let it soak in warm soapy water for about 30 minutes.
6
When you remove the keyboard, rinse with tap off any excess spray or dirt, dust and residual soap.
7
Blot dry with paper towels, then add the dry plate on the rack. You can even get rid of any excess water.
* Note: * You absolutely must let the keyboard dry completely. I want to leave there overnight to make sure it is completely dry.
8
When the Toshiba Satellite A10 Keyboard is dry, reinstall it into the motherboard via a ribbon cable into place. Close the hood, open the laptop, reinstall the screws.
9
Because the keyboard is removed and re-install, you might get an installation screen. Press F1 for the diagnosis, preservation and continue with the default
