You get a new laptop computer keyboard, you may want to know how can replace the keyboard. Here, we give you some suggestions:
First of all, from the laptop, hold down the two screws at the bottom of the laptop keyboard bezel. Baffle a bar, sitting all the function keys.
Second, open your laptop, open the lid, insert a credit card or baffle between the guitar and the selection of the laptop screen. Nail holes sitting on the bezel. You need to slowly pry up the bezel. There may be a crack-bit, when it was removed.
Third, stick to the keyboard, from the end closest to the screen, gently pull away from the touch pad and flip over. You can see the bottom of the ribbon connected to the keyboard. There is a small plastic connector, laptop ribbon. Carefully pull the two tabs, it is untied. A tap is located in every corner of the connector. Very gentle, when you do this, because this is the most frequently broken parts to change the Compaq Laptop Keyboard to get one. And ribbon will be released.
Fourth, carefully pull out the ribbon connector, and remove it with the keyboard.
COMPAQ Mini CQ10 Keyboard
Finally, the keyboard face down into the new keyboard, so you have access to a simple ribbon-cutting ceremony. Make sure the keyboard lined up, so when you flip the key in the correct position. Maintain the ribbon straight all the time. Twisting it be damaged. The connector’s ribbon-cutting. It’s just a way. Once in the right place, press the tab on the connector to lock it. Flip the COMPAQ Mini CQ10 Keyboard and touchpad and slide baffle wire nail holes and push into place. Then open the laptop, remove the two screws from the bottom to replace.
Now you can power on your laptop, take a look at the keyboard work. If it is working, you are successful. The next time you face such a problem, you can make it successfully resolved.
